Decorative plaster cement and lime base – ABRIB
It is used as a final layer to decorate the internal or external surface. Available in three grading, depending on the maximum grain size as follows: 1.5 mm; 2.0 mm; 2.5 mm. Manufactured in the structural or non-structural (full) form.
Adhesive for Styrofoam
Adhesive foam on the basis of cement and additives
It is used to repair the rough surfaces mortared with a basic mortar. The product is used as the adhesive for gluing reinforced networks, mineral wool and expanded polystyrene.
Network facade insulation facade systems have increasingly wider application in construction today. It proiveduvaat glass fibers which are refined with alkali resistant apritura. Most are used as reinforcement for installation in facade systems with EPS insulation. It can also be used for rebar coatings and remediation of internal or external walls. Facade grid-shaped strip can be glued, and various profiles for protecting the corners of okpanici, moldings and many other profiles.
|Styrofoam EPS||1 cm|
|Styrofoam EPS||2 cm|
|Styrofoam EPS||3 cm|
|Styrofoam EPS||5 cm|
|Styrofoam EPS||6 cm|
|Styrofoam EPS||8 cm|
|Styrofoam EPS||10 cm|
Shedding strip is made of perforated PVC profile on which both sides stuck along a network of glass fibers. Intended to be used on parts of the facades where to stop leakage under facade elements such as terraces and balconies.
Angle Shedding strip
PVC angular strip with a grid – are used to mechanically protect the corners of the walls, which shows high resistance to shocks and damages. Made of perforated PVC edge profile, which along both sides of the glass is glued network.